Inciexim
Sealed Our Trust
_edited.png){kind=small}
6a, Udayampalayam main road,
Sowripalayam,
Coimbatore-641028,
Tamil Nadu,
INDIA.
Carbon Steel Electrodes - (SMAW)
INCI 6010
AWS A5.1 E6010
EN ISO 2560-A E 38 2 C2 1
​E6010 is a high cellulose coated electrode designed to provide a smooth stable arc forceful enough to achieve deep penetration into the base metal. This electrode exhibits high deposition efficiency and low spatter loss. It produces a weld puddle that wets and spreads well, yet sets up fast enough to make this electrode ideal for vertical up or vertical down welding techniques. E6010 electrodes produce a flat weld bead with coarse ripples and a thin easily removable slag. E6010 electrodes may be used in the flat, horizontal, vertical or overhead welding positions.
Applications:
E6010 electrodes are most commonly used for out-of-position welding such as field construction, ship yards, water towers, pressure vessels, pressure pipes, steel castings, plain and galvanized steel storage tanks, etc.
INCI 6013
AWS A5.1 E6013
EN ISO 2560- B-E 43 13 A
E6013 high-titania coated electrodes produce weld deposits that are much smoother and flatter than those produced by E6012. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel. As a result, E6013 is an all-purpose electrode that provides a soft, steady arc, which is easily regenerated, easy slag control for vertical-down welding, low spatter, and a beautiful bead appearance. E6013 Electrodes may be used in any position with AC or DC (straight or reverse polarity).
Applications:
E6013 is commonly used for automobile bodies, truck frames and bodies, ornamental iron, metal furniture, farm implements, machinery guards, storage tanks, or wherever appearance is important or desirable.
INCI 7010G
AWS A5.1 E7010G
EN ISO 2560-B E 49 10 G A
E7010G is a high cellulose electrode developed specifically for welding pipe lines. Although this electrode may be used in any position, it is best suited for vertical up or vertical down welding. E7010G yields a forceful arc with deep penetration, producing a weld puddle that wets and spreads well, with rapid solidification. Weld deposits are of X-ray quality, with 70,000 psi tensile strengths and containing 1/2% Mo, E7010G electrodes may be used with AC or DC (reverse polarity).
Applications:
E7010G is most commonly used for welding carbon-moly piping used in high-pressure, high-temperature steam service and structural shapes, plates, and castings, which have a 1/2% Mo content.
INCI 7010G
AWS A5.1 E7018
EN ISO 2560 -B-E 49 18 A
E7018 is the most efficient general-purpose, iron powder — low hydrogen electrode used for welding carbon steels, free-machining steels, and low alloy steels with a minimum yield strength of 50,000 psi. E7018 has a very good deposition rate, providing a quiet steady arc with low spatter and medium penetration. Weld deposits are of X-ray quality with easy slag removal, exceptional mechanical properties and a smooth uniform bead appearance. E7018 has excellent operator appeal and may be used in any position with AC or DC (reverse polarity).
Applications:
E7018 electrodes are used for many ASTM specifications. More specific applications would include process piping, cold-rolled steels such as found in heavy machinery fabrications, fired and unfired pressure vessels, shop and field welding of bridges and structural steels, cast steels, shipbuilding, just about any medium carbon, low alloy steel where the welds are subject to X-ray inspection.